DR. TRC Lab Private Limited

CAS Number: 9087-61-0.

INCI Name: Aluminum Starch Octenylsuccinate.

Composition: Modified starch (typically corn starch).

• Chemically modified with octenylsuccinic anhydride and aluminum salts.
• Functions as an oil-absorbing, texture-enhancing agent.

Purity Grade: Cosmetic Grade (standard for skincare, color cosmetics, haircare).

• Food grade also available from some suppliers, but cosmetic use is more common.

Appearance: Fine, white to off-white powder.

• Odorless or very faint odor.

Solubility: Insoluble in water and oils.

• Dispersible in emulsions and oil-based systems.

Preservation: Self-preserving due to its dry, inert nature.

• No additional preservatives are typically required when used in powder form.

Storage: Store in a cool, dry place, tightly sealed.

• Keep away from moisture, heat, and direct sunlight.

Shelf life: Typically 2–3 years under proper condition.

Raw Material Sources: Derived from plant-based starches (commonly corn or maize).

• Modified with synthetic agents (octenylsuccinic anhydride and aluminum salts).

Manufacture: Produced by esterifying starch with octenylsuccinic anhydride.

• Followed by neutralization and reaction with aluminum salts to stabilize the starch molecule
• The product is then dried and milled into a fine powder.

Animal Testing: Not tested on animals by ethical or cruelty-free suppliers.

• Can be certified cruelty-free depending on manufacturer.

GMO: Available in both GMO and non-GMO grades (specify with supplier).

• Non-GMO versions are preferred for natural and clean beauty formulations.

Vegan: Yes – contains no animal-derived ingredients.

• Plant-based and suitable for vegan formulations.

• No known carcinogens or reproductive toxins in compliant, cosmetic-grade material.

Warning: Inhalation Risk: Fine powder may cause respiratory irritation if inhaled in large quantities during handling—use appropriate PPE (e.g., masks) in manufacturing settings.

• Eye Contact: May cause mild mechanical irritation.
  
  For external use only—not intended for ingestion or use in aerosolized spray applications without proper formulation precautions.

CAS Number: 5421-46-5.

INCI Name: Ammonium Thioglycolat.

Composition: Ammonium salt of thioglycolic acid.
Typically supplied as an aqueous solution (with 40–60% water).
Active component: HSCH₂COONH₄..

Purity Grade: Cosmetic Grade / Technical Grade.
Standard purity of ≥98% (as active content, depending on supplier).
Often sold as a 50% aqueous solution.

Appearance: Clear, colorless to pale yellow liquid
Characteristic sulfurous odor.

Solubility: Fully soluble in water.
Not soluble in oils or non-polar solvents.

Preservation: Does not require added preservatives
Stable under controlled pH and temperature.
Antioxidants may be used to enhance stability in complex formulations.

Storage: Store in a cool, dry, well-ventilated area.
Keep in tightly sealed containers, away from heat, light, and incompatible substances (e.g., oxidizers).
Recommended temperature: 5–25°C.
Protect from air and moisture to prevent oxidation.

Raw Material Sources: Derived synthetically from:
Thioglycolic acid (typically synthesized from chloroacetic acid and sodium hydrogen sulfide).
Neutralized with ammonium hydroxide.

Manufacture: Thioglycolic acid is synthesized from a base reaction of chloroacetic acid and hydrogen sulfide.
It is then neutralized with ammonium hydroxide to form Ammonium Thioglycolate.
The solution is filtered, pH-adjusted, and stabilized for cosmetic use.

Animal Testing: Not tested on animals by ethical suppliers.
May be eligible for cruelty-free certification if sourced accordingly.

GMO: Non-GMO — not derived from genetically modified organisms.
No biotechnological processes involved in its manufacture.

Vegan: Yes – synthetic and contains no animal-derived ingredients.
Suitable for vegan formulations.

Warning: For external use only.
May cause skin and eye irritation.
Can release toxic gases (hydrogen sulfide) if mixed improperly.
Wear gloves and eye protection when handling in concentrated form.
Avoid inhalation of vapors; use adequate ventilation in manufacturing.
Keep out of reach of children.
pH must be carefully controlled in final formulation (typically 7.0–9.5).

CAS Number: 56-81-5.

INCI: Glycerin.

Composition: CHEMKG GLYCERIN is composed of glycerin, a simple polyol compound derived from natural sources such as vegetable oils.

Purity Grade: USP/Ph. Eur. Grade (99.5% min).

Appearance: Clear, colorless, viscous liquid.

Solubility: Soluble in water and alcohol.

Preservation: Preservative-free.

Storage: Store in a tightly closed container in a cool, dry, and well-ventilated area at room temperature.

Raw Material Source: Derived from natural and renewable sources such as vegetable oils (e.g., palm, soy, or coconut oil).

Manufacture: Obtained through hydrolysis or transesterification of vegetable oils, followed by purification to high-grade standards.

Animal Testing: Not animal tested.

GMO: GMO-free (sourced from non-GMO raw materials).

Vegan: Does not contain animal-derived components.

Proposition: CHEMKG GLYCERIN complies with relevant cosmetic, pharmaceutical, and food-grade regulations.

Warning: Avoid contact with eyes. In case of eye contact, rinse immediately with plenty of water. Keep out of reach of children.

CAS Number: 1303-96-4

INCI: Disodium Tetraborate Decahydrate

Composition: FINECHEMO DSTB is composed of disodium tetraborate decahydrate, commonly known as borax. It consists of sodium, boron, oxygen, and water molecules and is widely used as a buffering agent, emulsifier, and viscosity modifier in cosmetic and industrial formulations.

Purity Grade: Technical or Cosmetic Grade (typically ≥ 99% as Na₂B₄O₇·10H₂O)

Appearance: White crystalline powder or granules

Solubility: Soluble in water; forms an alkaline solution. Insoluble in alcohol.

Preservation: Not applicable; chemically stable and does not require preservation.

Storage: Store in a tightly sealed container in a cool, dry, well-ventilated area. Avoid exposure to humidity and moisture to maintain its crystalline structure.

Raw Material Sources: Mined from naturally occurring borate mineral deposits such as tincal or kernite; also refined from brine or lake deposits rich in borates.

Manufacture: Produced by mining borate ores followed by refining and crystallization processes to isolate and purify disodium tetraborate decahydrate.

Animal Testing: Not animal tested

GMO: GMO-free (inorganic compound; not plant-derived)

Vegan: Does not contain animal-derived ingredients

Proposition: FINECHEMO DSTB complies with applicable industrial and cosmetic-grade standards. Note: Borax is restricted or banned in leave-on cosmetics in some jurisdictions (e.g., EU) due to concerns about reproductive toxicity. Compliance must be assessed based on product type and market regulations.

Warning: For external use only. Avoid inhalation of dust and contact with eyes or broken skin. May cause irritation with prolonged exposure. Use protective equipment during handling. Not recommended for use in products intended for children or pregnant individuals.

Description

Alkyl Polyglucoside 50% (APG 50%), also known as Polyglucose, is a biodegradable, non-ionic surfactant derived from renewable plant-based sources such as corn and coconut. It is known for its mildness, excellent foaming properties, and eco-friendly nature. APG 50% is widely used in the cosmetics and personal care industry as a gentle cleansing agent suitable for sensitive skin. Many manufacturers buy Alkyl Polyglucoside 50% in bulk due to its sustainability, effectiveness, and compatibility with various formulations. It is available for wholesale and large-scale sales to meet industrial and commercial production needs.

CAS Number: 68515-73-1

INCI: Alkyl Polyglucoside

Composition: ALKYL POLYGLUCOSIDE 50% is composed of alkyl polyglucoside, a combination of fatty alcohol and glucose derived from renewable resources.

Purity Grade: No purity grade applicable

Appearance: Clear to Pale Yellow

Solubility: Water Soluble

Preservation: Preservative-free

Storage: Store in a closed container at a dry place at room temperature

Raw Material Source: Derived from natural and renewable sources such as fatty alcohols and glucose.

Manufacture: Produced through environmentally friendly processes, emphasizing sustainability and green chemistry.

Animal Testing: Not animal tested

GMO: GMO-free (does not contain plant-derived components)

Vegan: Does not contain animal-derived components

Proposition: ALKYL POLYGLUCOSIDE 50% complies with relevant regulations and guidelines

CAS Number: 50878-20-3

INCI: Coco-Caprylate

Composition: FINECHEMO COCO CAPRYLATE is a naturally derived ester composed of a mixture of coconut alcohols and caprylic acid. It functions as a natural alternative to silicones, providing excellent spreadability, a light skin feel, and emolliency in cosmetic formulations.

Purity Grade: Cosmetic Grade (typically ≥ 98%)

Appearance: Clear, colorless to slightly yellow liquid

Solubility: Insoluble in water; soluble in oils and esters

Preservation: Preservative-free

Storage: Store in a tightly sealed container in a cool, dry place away from direct sunlight and sources of ignition

Raw Material Sources: Derived from natural coconut fatty alcohols and caprylic acid (from vegetable oils such as coconut or palm kernel oil)

Manufacture: FINECHEMO COCO CAPRYLATE is manufactured via esterification of fatty alcohols (from coconut) with caprylic acid under mild, solvent-free conditions, followed by purification to cosmetic-grade standards

Animal Testing: Not animal tested

GMO: GMO-free (plant-derived ingredients from non-GMO sources)

Vegan: Does not contain animal-derived components

Proposition: FINECHEMO COCO CAPRYLATE complies with relevant international cosmetic regulations, including EU Cosmetics Regulation and REACH requirements

Warning: For external use only. Avoid contact with eyes. Use personal protective equipment when handling large volumes.

CAS Number: 7778-18-9

INCI: Calcium Sulfate

Composition: FINECHEMO CaSO₄ is composed of calcium sulfate, an inorganic salt commonly encountered as the dihydrate (gypsum) or anhydrous form (white mineral). It functions as a bulking agent, opacifier, and pH adjuster in cosmetic and personal care products.

Purity Grade: Cosmetic/Pharmaceutical Grade (typically ≥ 98%)

Appearance: White, fine crystalline powder

Solubility: Slightly soluble in water (≈ 0.24 g/100 mL at 20 °C); insoluble in alcohol and oils

Preservation: Preservative-free

Storage: Store in a tightly closed container in a cool, dry, well-ventilated area. Protect from moisture and contamination.

Raw Material Sources: Mined from natural gypsum deposits or produced synthetically via precipitation from calcium chloride and sulfate salts

Manufacture: Obtained by mining and purification of gypsum rock (CaSO₄·2H₂O), followed by optional calcination to yield the anhydrous form; or by controlled chemical precipitation and filtration

Animal Testing: Not animal tested

GMO: GMO-free (inorganic mineral, no biological inputs)

Vegan: Does not contain animal-derived components

Proposition: FINECHEMO CaSO₄ complies with global cosmetic and pharmaceutical regulations (EU Cosmetics Regulation, FDA, USP/Ph. Eur., REACH) for safe use in topical formulations.

Warning: For external use only. Avoid inhalation of dust—may cause respiratory irritation. Use appropriate dust-control and personal protective equipment when handling the powder. Keep out of reach of children.

CAS Number: 139-33-3

INCI: Disodium EDTA

Composition: FC-CHELAT-NaEDTA is composed of disodium salt of ethylenediaminetetraacetic acid (EDTA), a chelating agent used to bind metal ions and prevent them from interacting with other ingredients in formulations. It helps stabilize and improve the efficacy of cosmetic, pharmaceutical, and household products.

Purity Grade: Cosmetic/Pharmaceutical Grade (typically ≥ 99%)

Appearance: White, crystalline powder or granular solid

Solubility: Soluble in water, forming a clear solution

Preservation: No additional preservatives required. It is stable under normal conditions, but formulations containing high metal concentrations may require additional preservation to prevent microbial growth.

Storage: Store in a tightly sealed container in a cool, dry, well-ventilated area. Avoid exposure to moisture and direct sunlight.

Raw Material Sources: Synthetically produced from ethylenediamine and chloroacetic acid, typically derived from petrochemical sources.

Manufacture: Manufactured through the reaction of ethylenediamine with chloroacetic acid to form EDTA, followed by neutralization with sodium hydroxide to form the disodium salt (Disodium EDTA).

Animal Testing: Not animal tested

GMO: GMO-free (synthetically produced)

Vegan: Does not contain animal-derived ingredients

Proposition: FC-CHELAT-NaEDTA complies with global cosmetic and pharmaceutical regulations, including those set by the EU, FDA, and other relevant authorities for use in personal care, cleaning, and industrial products.

Warning: Avoid inhalation or prolonged contact with skin and eyes. In case of eye contact, rinse thoroughly with water. Use appropriate safety equipment during handling. Not for oral consumption.

CAS Number: 7440-44-0

INCI: Charcoal Powder

Composition: Charcoal powder is primarily composed of carbon, along with small amounts of hydrogen, oxygen, and other elements. It is produced through the process of carbonization, which involves heating organic materials to high temperatures in the absence of oxygen.

Purity Grade: No purity grade applicable

Appearance: Charcoal powder appears as a fine, black powder with a porous texture

Solubility: Charcoal powder is insoluble in water and most organic solvents. However, it can adsorb various substances onto its surface due to its porous structure.

Preservation: Charcoal powder itself does not require preservation as it is chemically stable. However, it should be stored in a dry, cool place to prevent moisture absorption and maintain its properties.

Storage: Store in a closed container at a dry place at room temperature

Raw Material Source: Charcoal powder is derived from organic materials such as wood, coconut shells, or coal through a process of carbonization. The raw materials used can affect the properties and quality of the charcoal powder.

Manufacture: Charcoal powder is produced through the process of carbonization, which involves heating organic materials to high temperatures in the absence of oxygen. This process removes volatile components and leaves behind a carbon-rich material with a highly porous structure. The resulting charcoal is then ground into a fine powder.

Animal Testing: Not animal tested

GMO: GMO-free (does not contain plant-derived components)

Vegan: Does not contain animal-derived components

Proposition: CHARCOAL POWDER complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 8011-96-9.

INCI: Calamine.

Composition: Calamine is primarily composed of a mixture of zinc oxide (ZnO) and ferric oxide (Fe2O3), along with small amounts of other minerals. The exact composition may vary depending on the source and formulation.

Purity Grade: No purity grade applicable.

Appearance: Calamine typically appears as a pale pink, fine powder or as a creamy lotion when mixed with water or other liquid ingredients.

Solubility: Calamine is practically insoluble in water and most organic solvents. It forms a suspension when mixed with water, creating a soothing paste or lotion.

Preservation: Calamine itself has some antimicrobial properties due to the presence of zinc oxide, which can help prevent microbial growth in formulations. However, additional preservatives may be necessary in products containing calamine to ensure stability and safety.

Storage: Store in a closed container at a dry place at room temperature

Raw Material Source: The primary raw materials for calamine are zinc oxide and ferric oxide, which can be obtained from natural mineral deposits or synthesized chemically.

Manufacture: Calamine is typically manufactured by blending zinc oxide and ferric oxide in specific proportions to achieve the desired color and consistency. The mixture may undergo further processing, such as milling or grinding, to produce a fine powder suitable for use in formulations. Alternatively, calamine lotion can be prepared by suspending the powdered mixture in a liquid base.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: CALAMINE complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

Calcium Sulphate (CaSO₄) is a naturally occurring mineral commonly found in gypsum and anhydrite. It is widely used in various industries due to its excellent binding, thickening, and setting properties. Available in different forms such as dihydrate (CaSO₄·2H₂O) and anhydrous (CaSO₄), it is extensively used in construction, food, pharmaceuticals, and cosmetics. Manufacturers and suppliers offer Calcium Sulphate in bulk, ensuring easy buying, sales, and wholesale supply for various applications.

Uses in the Cosmetics Industry:
In the cosmetic and personal care industry, Calcium Sulphate acts as a filler, bulking agent, and viscosity-controlling ingredient. It is commonly found in:

• Face powders and pressed makeup to improve texture and consistency.
• Skincare formulations as an absorbent to control excess oil.
• Bath and body care products to enhance product stability.
• Toothpaste as a mild abrasive for effective cleaning.

With a strong demand in cosmetic ingredient manufacturing, Calcium Sulphate is available from wholesale suppliers and bulk distributors catering to brands and formulators.

CAS Number: 7778-18-9.

INCI: Calcium Sulphate.

Composition: Calcium sulphate has the chemical formula CaSO4. It exists in various hydrated and anhydrous forms, including calcium sulphate dihydrate (CaSO4·2H2O) and calcium sulphate hemihydrate (CaSO4·1/2H2O).

Purity Grade: No purity grade applicable.

Appearance: Calcium sulphate typically appears as a white to off-white, odorless powder or crystalline solid.

Solubility: Calcium sulphate is sparingly soluble in water, with solubility increasing at higher temperatures. However, it is insoluble in alcohol and other organic solvents.

Preservation: Calcium sulphate itself does not possess preservative properties. However, it is stable and inert, making it suitable for use in various formulations without the need for additional preservatives.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Calcium sulphate is primarily sourced from natural mineral deposits, including gypsum deposits found in sedimentary rocks. It can also be produced as a byproduct of various industrial processes, such as the flue gas desulfurization process in power plants.

Manufacture: Calcium sulphate can be obtained through mining and processing natural gypsum ore or by chemical synthesis from calcium carbonate and sulfuric acid. The mined gypsum is crushed and ground into a fine powder, which can then be further processed to produce different grades and forms of calcium sulphate, including plaster of Paris.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: CALCIUM SULPHATE complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling. 

CAS Number: 79725-98-7.

INCI: Kojic Acid Dipalmitate.

Composition: Kojic Acid Dipalmitate is composed of kojic acid molecules esterified with palmitic acid, resulting in improved stability and solubility in cosmetic formulations compared to kojic acid alone.

Purity Grade: No purity grade applicable.

Appearance: Kojic Acid Dipalmitate is typically a white to off-white crystalline powder.

Solubility: It is soluble in oil-based solvents and some organic solvents but has limited solubility in water.

Preservation: Kojic Acid Dipalmitate should be stored in a cool, dry place away from direct sunlight and heat to prevent degradation. It should also be protected from moisture to maintain its stability.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source Kojic Acid Dipalmitate is synthesized from kojic acid, which is naturally derived from certain fungi, and palmitic acid, which can be obtained from plant or animal sources.

Manufacture: Kojic Acid Dipalmitate is synthesized from kojic acid, which is naturally derived from certain fungi, and palmitic acid, which can be obtained from plant or animal sources.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: KOJIC ACID DIPALMITATE complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes. In case of contact, rinse thoroughly with water. Use appropriate protective equipment when handling. Keep out of reach of children.

CAS Number: 28874-51-3
INCI Name: Sodium PCAComposition:Sodium salt of pyrrolidone carboxylic acid (PCA); a naturally occurring humectant found in the skin’s natural moisturizing factors (NMF)
Purity Grade: Cosmetic/Pharmaceutical Grade
Appearance: Colorless to pale yellow, slightly viscous liquid or powder (depending on form)
Solubility: Highly soluble in water; insoluble in oils
Preservation: Typically requires preservatives when in aqueous solutions (e.g., phenoxyethanol or parabens), especially in multi-component formulations
Storage: Store in a cool, dry place away from direct sunlight and moisture; protect from oxidation in aqueous solutions
Raw Material Sources: Derived from plant-based sources (e.g., glucose fermentation to glutamic acid, then cyclization and neutralization with sodium hydroxide)
Manufacture: Produced through fermentation of glucose or other carbohydrates to obtain L-glutamic acid, followed by cyclization to PCA and neutralization to form Sodium PCAAnimal Testing: Often available from cruelty-free suppliers; verify per manufacturer
GMO: Non-GMO versions widely available; depends on fermentation substrate
Vegan: Yes; synthetic or plant-based and does not contain animal-derived substances
Proposition: Generally compliant with California Proposition 65; not associated with any listed toxicants
Warning: Low-irritation profile; generally recognized as safe, though in rare cases may cause mild irritation in sensitive skin when used in high concentrations

Allantoin (CAS No. 97-59-6) is a widely used skin-conditioning agent known for its moisturizing, soothing, and healing properties. It is naturally found in plants like comfrey but is primarily manufactured synthetically for cosmetic and pharmaceutical applications. Allantoin is a non-irritating, effective ingredient that enhances skin softness and promotes cell regeneration, making it a popular choice for skincare formulations.

CAS Number: 97-59-6.

INCI: Allantoin.

Composition: Chemically, allantoin is a diureide of glyoxylic acid. Its molecular formula is C4H6N4O3.

Purity Grade: No purity grade applicable.

Appearance: Allantoin is typically found as a fine, white, crystalline powder.

Solubility: It is soluble in hot water and glycerin, sparingly soluble in alcohol, and practically insoluble in ether and chloroform.

Preservation: Allantoin itself possesses some preservative properties, but additional preservatives may be required depending on the formulation and intended use of the product.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Allantoin can be sourced from natural botanical extracts, particularly from the roots of the comfrey plant (Symphytum officinale), or synthesized chemically from precursor compounds such as urea and glyoxylic acid or its derivatives.

Manufacture: Allantoin can be manufactured through chemical synthesis or extracted from natural sources. In chemical synthesis, urea reacts with glyoxylic acid or its derivatives to produce allantoin. Alternatively, allantoin can be extracted from comfrey roots through a process of crushing or grinding the roots to release the allantoin-containing extract, which is then further processed to isolate and purify the allantoin compound.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: ALLANTOIN complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 5421-46-5.

INCI Name: Ammonium Thioglycolat.

Composition: Ammonium salt of thioglycolic acid.
Typically supplied as an aqueous solution (with 40–60% water).
Active component: HSCH₂COONH₄.

Purity Grade: Cosmetic Grade / Technical Grade.
Standard purity of ≥98% (as active content, depending on supplier).
Often sold as a 50% aqueous solution.

Appearance: Clear, colorless to pale yellow liquid.
Characteristic sulfurous odor.

Solubility: Fully soluble in water.
Not soluble in oils or non-polar solvents.

Preservation: Does not require added preservatives.
Stable under controlled pH and temperature.
Antioxidants may be used to enhance stability in complex formulations.

Storage: Store in a cool, dry, well-ventilated area.
Keep in tightly sealed containers, away from heat, light, and incompatible substances (e.g., oxidizers).
Recommended temperature: 5–25°C.
Protect from air and moisture to prevent oxidation.

Raw Material Sources: Derived synthetically from:
Thioglycolic acid (typically synthesized from chloroacetic acid and sodium hydrogen sulfide).
Neutralized with ammonium hydroxide.

Manufacture: Thioglycolic acid is synthesized from a base reaction of chloroacetic acid and hydrogen sulfide.
It is then neutralized with ammonium hydroxide to form Ammonium Thioglycolate.
The solution is filtered, pH-adjusted, and stabilized for cosmetic use.

Animal Testing: Not tested on animals by ethical suppliers.
May be eligible for cruelty-free certification if sourced accordingly.

GMO: Non-GMO — not derived from genetically modified organisms.
No biotechnological processes involved in its manufacture.

Vegan: Yes – synthetic and contains no animal-derived ingredients.
Suitable for vegan formulations.

Warning: For external use only.
May cause skin and eye irritation.
Can release toxic gases (hydrogen sulfide) if mixed improperly.
Wear gloves and eye protection when handling in concentrated form.
Avoid inhalation of vapors; use adequate ventilation in manufacturing.
Keep out of reach of children.
pH must be carefully controlled in final formulation (typically 7.0–9.5).

CAS Number: 68988-56-7.

INCI: Trimethylsiloxyocilate.

Composition: Trimethylsiloxyocilate is composed of trimethylsiloxysilicate units (-Si(CH₃)₃O-) linked together through siloxane bonds. It typically contains additional functional groups that contribute to its emollient properties.

Purity Grade: No purity grade applicable.

Appearance: Trimethylsiloxyocilate is a clear, colorless liquid with a viscous texture.

Solubility: Trimethylsiloxyocilate is insoluble in water but soluble in a wide range of organic solvents and oils. It forms stable emulsions when combined with water-based ingredients in cosmetic formulations.

Preservation: Trimethylsiloxyocilate is inherently stable under normal storage conditions. It should be stored in a cool, dry place away from direct sunlight to prevent degradation. Proper storage practices help maintain its quality and effectiveness over time.

Storage: Store in a closed container at a dry place at room temperature.        

Raw Material Source : The raw materials for Trimethylsiloxyocilate production include siloxane compounds derived from silicon, oxygen, and organic groups. These raw materials undergo synthesis and purification processes to obtain the desired silicone compound.

Manufacture: Trimethylsiloxyocilate is manufactured through the controlled reaction of trimethylsilanol with other siloxane compounds under suitable conditions. The synthesis typically involves hydrolysis, condensation, and functionalization steps to produce the final Trimethylsiloxyocilate compound.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: TRIMETHYLSILOXYOCILATE complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes. In case of contact, rinse thoroughly with water. Use appropriate protective equipment when handling. Keep out of reach of children.

CAS Number: 29806-73-3

INCI: Octyl Palmitate

Composition: OCTYL PALMITATE is the ester of 2-ethylhexyl alcohol (a branched-chain fatty alcohol) and palmitic acid (a saturated fatty acid). It functions as an emollient, skin-conditioning agent, and solvent in cosmetic and personal care formulations.

Purity Grade: Cosmetic and pharmaceutical grade available; typical purity ≥ 95% (verify with supplier specifications).

Appearance: Clear, colorless to pale yellow oily liquid

Solubility: Insoluble in water; soluble in most oils and organic solvents

Preservation: No preservatives required for the pure material. Finished formulations may require preservation depending on other ingredients and water content.

Storage: Store in a tightly closed container in a cool, dry, and well-ventilated place, away from direct sunlight, heat, and strong oxidizing agents.

Raw Material Sources: Palmitic acid from natural sources (e.g., palm oil, coconut oil) or synthetic origin; 2-ethylhexyl alcohol from petrochemical sources

Manufacture: Produced via esterification of palmitic acid with 2-ethylhexyl alcohol under controlled heating and catalysis, followed by purification

Animal Testing: Not animal tested (subject to manufacturer’s certification)

GMO: GMO-free when sourced from non-GMO raw materials (confirm with supplier)

Vegan: Can be vegan when both fatty acid and fatty alcohol are sourced from plant-based and synthetic origins without animal derivatives

Proposition: OCTYL PALMITATE complies with relevant cosmetic regulations (EU Regulation EC No. 1223/2009, REACH registration, FDA cosmetic guidelines).

Warning: For external use only. Avoid contact with eyes. Use personal protective equipment when handling in bulk.

CAS Number: 1066-33-7

INCI: Ammonium Bicarbonate

Composition: CHEMKG-ABC is composed of ammonium bicarbonate, a chemical compound that is used as a leavening agent in food and an acidulant in cosmetics. It consists of ammonium (NH₄⁺) and bicarbonate (HCO₃⁻) ions.

Purity Grade: Technical Grade or Pharmaceutical Grade (depending on the specific application)

Appearance: White crystalline powder or granular form

Solubility: Soluble in water, decomposes to form ammonia and carbon dioxide in the presence of moisture or heat

Preservation: Preservative-free

Storage: Store in a tightly closed container in a cool, dry place, away from moisture and heat. Avoid storing in areas with high humidity to prevent decomposition.

Raw Material Source: Synthetically produced through the reaction of ammonia and carbon dioxide in water

Manufacture: Manufactured through a controlled chemical process involving ammonia and carbon dioxide in water, typically under industrial conditions

Animal Testing: Not animal tested

GMO: GMO-free

Vegan: Does not contain animal-derived components

Proposition: CHEMKG-ABC complies with cosmetic and food safety regulations, as well as global guidelines for its intended applications

Warning: Avoid inhalation of dust. Handle with care, using appropriate protective equipment. Store in a dry, cool environment, and keep away from strong acids or alkalis.

• Description

Amino Methyl Propanol (AMP 95) is an organic amine compound widely used as a pH adjuster and neutralizing agent in various formulations. It is a clear, water-soluble liquid with excellent buffering properties, making it ideal for applications in cosmetics, personal care, and industrial products. Many manufacturers buy AMP 95 in bulk due to its effectiveness in stabilizing formulations and enhancing product performance. Available for wholesale and large-scale sales, AMP 95 is a crucial ingredient for industries requiring precise pH control.

AMP 95 is widely used in the cosmetic and personal care industry to regulate pH levels and improve the stability of formulations. It is commonly found in:

• Skincare Products: Used in creams, lotions, and cleansers to balance pH and enhance product stability.
• Haircare Products: Found in shampoos, conditioners, and hair styling gels for better texture and consistency.
• Makeup & Sunscreens: Helps maintain the effectiveness of foundations, mascaras, and sun protection products.
• Aerosol Formulations: Used in sprays and foams to improve application properties.

Cosmetic manufacturers prefer to buy AMP 95 in bulk or wholesale due to its high efficiency and compatibility with various beauty formulations.

When used in regulated concentrations, AMP 95 is generally safe for cosmetic applications. However, excessive amounts or improper formulation may lead to:

• Mild skin irritation in sensitive individuals.
• Temporary eye discomfort upon direct contact.
• Respiratory irritation if inhaled in high concentrations.

To ensure safe usage, manufacturers should follow recommended dosage guidelines when incorporating AMP 95 into their products.

• Skin & Eye Irritation: Direct contact may cause mild irritation; protective measures should be taken during handling.
• Inhalation Risks: Vapors or mist from AMP 95 can irritate the respiratory system; proper ventilation is advised.
• Storage & Handling: Store in a cool, dry place away from strong acids and oxidizing agents to prevent degradation.

CAS Number: 28874-51-3

INCI: Sodium PCA

Composition: NANOMOIST NaPCA consists of the sodium salt of pyrrolidone carboxylic acid (PCA), a naturally occurring humectant found in human skin. It is widely used in personal care formulations for its strong moisture-binding and skin-conditioning properties.

Purity Grade: Cosmetic Grade (typically ≥ 98%)

Appearance: Clear to pale yellow liquid or crystalline powder (depending on grade)

Solubility: Highly soluble in water; insoluble in oils

Preservation: Self-preserving under standard conditions; no additional preservatives typically required

Storage: Store in a tightly sealed container in a cool, dry place away from direct sunlight and moisture. Keep at room temperature.

Raw Material Sources: Derived from plant-based L-glutamic acid (often sourced from sugar beets or other renewable plant sources)

Manufacture: Produced via the cyclization of L-glutamic acid to form pyrrolidone carboxylic acid (PCA), followed by neutralization with sodium hydroxide to form Sodium PCA.

Animal Testing: Not animal tested

GMO: GMO-free (derived from non-GMO plant sources)

Vegan: Contains no animal-derived ingredients

Proposition: NANOMOIST NaPCA complies with global cosmetic regulatory standards including EU, FDA, and ASEAN guidelines.

Warning: For external use only. Avoid contact with eyes. In case of eye contact, rinse immediately with water. Handle in accordance with standard hygiene practices.

• Description

Ceteareth-50 is a non-ionic surfactant and emulsifying agent derived from the ethoxylation of a mixture of cetyl and stearyl alcohols, which are fatty alcohols typically sourced from plant or synthetic origins. It appears as a white to off-white solid or flake and is soluble in water and oils, making it effective in creating stable oil-in-water emulsions. Known for its excellent emulsifying properties and high HLB (hydrophilic-lipophilic balance) value, Ceteareth-50 is used extensively in personal care products to improve texture, consistency, and shelf-life of formulations. It is available for bulk and wholesale supply, widely used in both conventional and specialized skincare products.

Ceteareth-50 is commonly used in:

• Creams, lotions, and moisturizers to emulsify oil and water components and ensure product stability.
• Hair conditioners and treatments to enhance spreadability and improve product texture.
• Sunscreens and anti-aging formulations where a stable emulsion and light feel are desired.
• Pharmaceutical-grade topical products as a base emulsifier.
• Wash-off products such as facial cleansers and body washes for mild cleansing and emulsion formation.
• Its strong emulsifying power makes it especially useful in formulations requiring a high oil content or heat stability.

Ceteareth-50 is generally considered safe for cosmetic use when used according to recommended concentrations. However, as with other ethoxylated compounds, there may be concerns about potential contamination with 1,4-dioxane, a by-product of the ethoxylation process and a suspected carcinogen. Therefore, it is essential to use only materials that are properly purified and compliant with cosmetic safety standards. In rare cases, Ceteareth-50 may cause mild irritation or allergic reactions, particularly in individuals with compromised or damaged skin. During manufacturing, appropriate personal protective equipment (PPE) such as gloves, goggles, and dust masks should be used to avoid skin contact and inhalation. Store the ingredient in a cool, dry, and well-ventilated place, away from direct heat or moisture

• Description

Phenyl Trimethicone is a silicone-based polymer widely used in the cosmetic and personal care industry for its excellent conditioning, film-forming, and shine-enhancing properties. It is a clear, low-viscosity liquid that provides a luxurious, silky feel to formulations. The phenyl group in its structure enhances compatibility with organic oils and improves its spreadability and gloss. Unlike volatile silicones, Phenyl Trimethicone offers long-lasting smoothness and protection without leaving a greasy residue. It is particularly valued for improving the sensory texture of creams, serums, hair treatments, and color cosmetics.

Phenyl Trimethicone is a multifunctional ingredient used in a wide range of personal care products, including:

• Hair Care Products: Enhances shine, smoothness, and manageability in shampoos, conditioners, and styling products. It also helps reduce frizz and protects hair from thermal damage.
• Skin Care Formulations: Provides a velvety, non-greasy finish while improving the spreadability of creams and lotions. It forms a protective layer that reduces transepidermal water loss (TEWL).
• Color Cosmetics: Improves spreadability and adherence in foundations, BB creams, and lipsticks, imparting a smooth, luminous finish.
• Sun Care Products: Enhances the water resistance and spreadability of sunscreens, ensuring uniform coverage of UV filters.
• Serums & Anti-Aging Products: Adds a soft-focus effect to blur fine lines and improve overall skin appearance.

Manufacturers often use Phenyl Trimethicone in bulk for high-performance formulations where shine, protection, and luxurious texture are desired.

Phenyl Trimethicone is considered safe for cosmetic use and is well-tolerated by most skin types. However, standard handling and formulation precautions should be observed:

• Skin Sensitivity: Generally non-irritating and non-sensitizing; rare cases of mild irritation may occur on very sensitive or damaged skin.
• Eye Contact: Direct contact may cause mild, temporary irritation; avoid eye exposure.
• Inhalation Risk: Not recommended for aerosolized applications without proper particle size control to prevent respiratory irritation.
• Environmental Impact: Being a silicone derivative, it is non-biodegradable and may persist in the environment; eco-conscious formulations may consider silicone alternatives.

• Storage: Store in a cool, dry area, away from direct sunlight and strong oxidizing agents. Keep containers tightly closed to prevent contamination.
• Stability: Highly stable under a broad range of temperatures and pH levels. Compatible with most cosmetic oils, waxes, and emulsifiers.

• DESCRIPTION

Cyclomethicone is a lightweight, volatile silicone commonly used in the cosmetics and personal care industry. Known for its silky, non-greasy feel, this clear and odorless ingredient evaporates quickly, leaving behind no residue. It acts as an effective carrier for active ingredients and enhances the spreadability of formulations. Cyclomethicone is widely favored in the beauty and skincare sector for its smooth texture and quick-drying properties.

Cyclomethicone plays a vital role in the manufacture of various cosmetic and personal care products, including:

• Skin Care Products: Used in lotions, creams, and serums to provide a lightweight, smooth application.
• Hair Care Formulations: Found in conditioners and styling products to add silkiness without buildup.
• Makeup & Primers: Enhances the texture of foundations, concealers, and setting sprays.
• Deodorants & Antiperspirants: Helps deliver active ingredients while ensuring a dry, non-sticky feel.
• Sunscreens & Serums: Improves spreadability and absorption of UV filters and other actives.

If you are looking to buy Cyclomethicone in bulk or wholesale, sourcing high-purity cosmetic-grade silicone ensures premium product quality and performance.

Although Cyclomethicone is generally safe for topical use, some considerations include:

• Skin Sensitivity: Rare cases of mild irritation in individuals with sensitive skin.
• Inhalation Risks: Avoid prolonged inhalation of vapors during the manufacturing process.
• Environmental Concerns: Some forms of Cyclomethicone may persist in the environment, making it important to choose eco-friendly formulations.
• Flammability: As a volatile silicone, it is flammable and should be stored properly away from heat sources.

TMS-803 is a silicone-based conditioning agent widely used in personal care and haircare formulations. It enhances softness, smoothness, and shine while improving combability and reducing static. Its excellent compatibility with surfactant systems makes it ideal for shampoos, conditioners, and styling products, delivering long-lasting performance with a lightweight, silky finish.
TMS-803
CAS Number: Not publicly disclosed; typical of proprietary silicone resins such as trimethylsiloxysilicate and co-hydrolysis products of tetraalkoxysilane and trimethylethoxysilane 
INCI: Trimethylsiloxysilicate 
Composition:
A three-dimensional crosslinked silicone resin formed from co-hydrolysis of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit), featuring end-blocking trimethylsilyl groups and residual ethoxy/hydroxy functionalities 
Purity Grade: Cosmetic grade resin with standardized particle profile; free from aromatic solvents like toluene 
Appearance: White powder with uniform particle size distribution and low dust content, contributing to excellent flowability 
Solubility: Insoluble in water; compatible with polydimethylsiloxanes and various oils/organic phases 
Preservation: Preservative-free—stable inorganic silicone resin that does not support microbial growth.
Storage: Store in tightly sealed containers in a cool, dry environment; shelf life is batch-labeled with “Best use before end” date. Usage beyond this date may require performance validation 
Raw Material Sources: Derived synthetically through silicone chemistry involving tetraalkoxysilane and trimethylethoxysilane.
Manufacture: Produced via controlled co-hydrolysis (sol–gel) of Q and M silane precursors, followed by drying and milling into a free-flowing powder 
Animal Testing: Not animal tested; aligns with cruelty-free practices in cosmetic ingredients 
GMO: GMO-free (purely synthetic inorganic composition; no biological materials involved).
Vegan: Does not contain animal-derived components—suitable for vegan cosmetic formulations.
Proposition:Functions as an excellent film former and water-resistant additive in sunscreen, skincare, and color cosmetics. It helps maintain pigment placement, prevents agglomeration in powders, improves humidity resistance in haircare, and provides long-wear, transfer-resistant benefits 
Warning:For external use only. Avoid inhalation of fine powder. Use appropriate personal protective equipment during manufacturing (e.g., dust mask, gloves). In case of contact with eyes, rinse thoroughly.

CAS Number: 73398-61-5.

INCI: Caprylic/Capric Triglyceride.

Composition: CCTG is composed of esters derived from caprylic and capric fatty acids and glycerin.

Purity Grade: No purity grade applicable.

Appearance: Clear, colorless liquid.

Solubility: Insoluble in water; soluble in oils and other lipophilic solvents.

Preservation: CCTG formulations may include antioxidants to maintain product stability.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Derived from natural sources such as coconut or palm oil.

Manufacture: CCTG is produced through esterification processes using high-quality fatty acids and glycerin.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

HS Code: 29159090.

Proposition: CCTG complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 81646-13-1.

INCI Name: Behentrimonium Methosulfate.

Composition: Behentrimonium Methosulfate (typically blended with Cetearyl Alcohol for emulsifying and conditioning synergy).
Cationic quaternary ammonium compound derived from behentrimonium chloride and methosulfuric acid.

Purity Grade: Cosmetic Grade.
Active content typically 25–85% depending on the formulation (e.g., 25% active in a 75% cetearyl alcohol blend).

Appearance: White to off-white wax-like solid flakes or pellets.
Mild characteristic odor.

Solubility: Dispersible in water when emulsified
Soluble in hot water and alcohols.
Typically melted into oil phase during emulsification.

Preservation: Behentrimonium Methosulfate itself is self-preserving due to its cationic nature.
Final formulations may include added preservatives as needed.
.
Storage: Store in a cool, dry place, tightly sealed Keep away from direct sunlight and moisture.
Recommended storage temperature: 15–30°C.
Shelf life: typically 2 years under optimal conditions.

Raw Material Sources: Derived from rapeseed oil (colza oil) – natural source of behenic acid (C22 fatty acid).
Quaternized with methosulfuric acid.

Manufacture: Synthesized via quaternization of behenyl amine with dimethyl sulfate or methosulfuric acid, resulting in a mild cationic surfactant.

Animal Testing: Not tested on animals by ethical suppliers.
Can be sourced from cruelty-free certified manufacturers (e.g., Leaping Bunny, PETA-approved)..

GMO Status: Typically Non-GMO.
Confirmed by suppliers sourcing non-GMO vegetable oils.

Vegan Status: Yes, it is vegan-friendly.
Contains no animal-derived ingredients and is produced synthetically from plant-based feedstocks.

Warning: For external use only.
Avoid contact with eyes and mucous membranes
May cause mild irritation to sensitive individuals in high concentrations.
Should be used within recommended concentration levels (typically 1–10% in cosmetic formulations).

CAS Number: 7727-54-0.

INCI: Ammonium Persulfate.

Composition: Chemkg-APS is composed of Ammonium Persulfate, a strong oxidizing agent commonly used in cosmetic and industrial applications, including as a hair bleaching agent and in polymerization processes.

Purity Grade: Technical Grade / Industrial Grade.

Appearance: White crystalline powder or fine granules.

Solubility: Soluble in water, decomposes in aqueous solutions releasing oxygen.

Preservation: Preservative-free.

Storage: Store in a tightly sealed container in a cool, dry place, away from direct sunlight, heat, and moisture. Keep away from incompatible materials such as reducing agents or flammable substances.

Raw Material Source: Synthetic product derived from ammonium sulfate and hydrogen peroxide.

Manufacture: Produced through controlled chemical processes involving the reaction of ammonium sulfate with hydrogen peroxide under specific conditions to form ammonium persulfate.

Animal Testing: Not animal tested.

GMO: GMO-free.

Vegan: Does not contain animal-derived components.

Proposition: Chemkg-APS complies with relevant regulations for industrial and cosmetic use. It is used in hair treatments, polymer chemistry, and other oxidizing applications.

Warning: Causes severe irritation to eyes, skin, and respiratory tract. Handle with care and use appropriate protective equipment (gloves, goggles, mask) when handling. Avoid inhalation or ingestion. Keep away from heat, sparks, and open flames.

CAS Number: 61789-40-0.

INCI: Cocamidopropyl Betaine.

Composition: CAPB is composed of a mixture of amphoteric surfactants derived from coconut oil, typically featuring cocamidopropyl betaine as the major component.

Purity Grade: No purity grade applicable.

Appearance: Clear to slightly hazy liquid.

Solubility: Soluble in water.

Preservation: CAPB formulations may include mild preservatives to maintain product stability.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Derived from coconut oil, a natural and renewable resource.

Manufacture: CAPB is produced through chemical processes involving the reaction of coconut oil derivatives with certain chemicals.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components

HS Code: 34021900.

Proposition: COCAMIDOROPYL BEATAIN complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 9087-61-0.

INCI Name: Aluminum Starch Octenylsuccinate.

Composition: Modified starch (typically corn starch).

• Chemically modified with octenylsuccinic anhydride and aluminum salts
• Functions as an oil-absorbing, texture-enhancing agent.

Purity Grade: Cosmetic Grade (standard for skincare, color cosmetics, haircare).

• Food grade also available from some suppliers, but cosmetic use is more common.

Appearance: Fine, white to off-white powder.

• Odorless or very faint odor.

Solubility: Insoluble in water and oils.

• Dispersible in emulsions and oil-based systems.

Preservation: Self-preserving due to its dry, inert nature.

• No additional preservatives are typically required when used in powder form.

Storage: Store in a cool, dry place, tightly sealed.

• Keep away from moisture, heat, and direct sunlight.

Shelf life: Typically 2–3 years under proper condition.

Raw Material Sources: Derived from plant-based starches (commonly corn or maize).

• Modified with synthetic agents (octenylsuccinic anhydride and aluminum salts).

Manufacture: Produced by esterifying starch with octenylsuccinic anhydride.

• Followed by neutralization and reaction with aluminum salts to stabilize the starch molecule
• The product is then dried and milled into a fine powder.

Animal Testing: Not tested on animals by ethical or cruelty-free suppliers.

• Can be certified cruelty-free depending on manufacturer.

GMO: Available in both GMO and non-GMO grades (specify with supplier).

• Non-GMO versions are preferred for natural and clean beauty formulations.

Vegan: Yes – contains no animal-derived ingredients.

• Plant-based and suitable for vegan formulations.

Warning: Inhalation Risk: Fine powder may cause respiratory irritation if inhaled in large quantities during handling—use appropriate PPE (e.g., masks) in manufacturing settings

• Eye Contact: May cause mild m.echanical irritation.
  
  For external use only—not intended for ingestion or use in aerosolized spray applications without proper formulation precautions.

CAS Number: 7727-54-0.

INCI: Ammonium Persulphate.

Composition: Ammonium Persulfate is composed of two ammonium ions (NH4+) and one persulfate ion (S2O8^2-).

Purity Grade: No purity grade applicable.

Appearance: It typically appears as a white, crystalline powder.

Solubility: Ammonium Persulphate is highly soluble in water.

Preservation: Due to its strong oxidizing properties, Ammonium Persulphate itself acts as a preservative in certain formulations by preventing microbial growth. However, its efficacy as a preservative depends on the specific formulation and conditions of use.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Ammonium Persulphate is synthesized from ammonium sulfate ((NH4)2SO4) and sodium persulfate (Na2S2O8) through a reaction process.

Manufacture: Ammonium Persulphate is manufactured through the reaction between ammonium sulphate and sodium persulphate. This reaction typically occurs in an aqueous solution and results in the formation of Ammonium Persulphate crystals. The crystals are then separated, dried, and processed into the desired form, usually a fine powder.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

Proposition: AMMONIUM PERSULPHATE complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 56-81-5.

INCI: Glycerin.

Composition: Glycerin is a trihydric alcohol with a chemical formula of C3H8O3, consisting of three hydroxyl groups.

Purity Grade: No purity grade applicable.

Appearance: Clear, viscous liquid with a syrupy consistency.

Solubility: Highly soluble in water and is also miscible with alcohol.

Preservation: Glycerin itself has inherent antimicrobial properties, and its hygroscopic nature aids in preservation.

Storage: Store in a closed container at a dry place at room temperature.

Raw Material Source: Glycerin can be derived from both animal and plant sources.

Manufacture: Glycerin can be produced through various methods, including saponification of fats or as a byproduct of biodiesel production.

Animal Testing: Not animal tested.

GMO: GMO-free (does not contain plant-derived components).

Vegan: Does not contain animal-derived components.

HS Code: 29054500.

Proposition: GLYCERIN complies with relevant regulations and guidelines.

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 79-14-1.

INCI Name: Glycolic Acid.

Composition: The simplest alpha hydroxy acid (AHA), with the molecular formula C₂H₄O₃; consists of a hydroxyl group and a carboxylic acid group.

Purity Grade: Cosmetic/Pharmaceutical/Industrial Grade (purity often ≥ 99% for cosmetic and pharmaceutical use)

Appearance: Colorless to pale yellow crystalline solid or aqueous solution (commonly available as 30–70% solution).

Solubility: Highly soluble in water; also soluble in alcohols and acetone.

Preservation: Not typically preserved when in pure form; aqueous solutions may require antimicrobial preservatives (e.g., phenoxyethanol) depending on formulation.

Storage: Store in a tightly closed container in a cool, well-ventilated area; protect from moisture and direct sunlight; avoid contact with metals.

Raw Material Sources: Typically synthesized from formaldehyde and synthesis gas (carbon monoxide and hydrogen) or via catalytic oxidation of glycol.

Manufacture: Produced through chemical synthesis (non-natural), though natural sources like sugar cane contain trace amounts.

Animal Testing: Varies by supplier; many cosmetic-grade sources are cruelty-free certified.

GMO: Not derived from genetically modified organisms.

Vegan: Yes; synthetically derived without animal components.

Proposition: Generally compliant with Proposition 65 when formulated and handled correctly; no known direct Prop 65 listing, but caution advised for formulations containing impurities like formaldehyde.

Warning: Corrosive in high concentrations; can cause severe skin and eye irritation; pH must be adjusted for safe cosmetic use (typically 3.5–4.0 for leave-on products).

CAS NO :-118-60-5.

INCI:-Octyl Salicylate.

COMPOSITION:-Chemical Formula: C15H22O3.
Molecular Weight: 250.34 g/mol.
An ester of salicylic acid and 2-ethylhexanol.

PURITY GRADE:-Typically ≥ 99% (Cosmetic or Pharmaceutical grade).

APPEARANCE:-Clear, colorless to pale yellow liquid.
Faint, characteristic odor.

SOLUBILITY:-Insoluble in water.
Soluble in oils and organic solvents such as ethanol.

PRESEVATION:-Stable in well-formulated products.
Does not require additional preservatives in raw material form.

STORAGE:-Store in a cool, dry place, away from direct sunlight and heat sources.
Recommended storage temperature: 15–30°C (59–86°F).

RAW MATERIAL SOURCE:- Synthetic, derived from petrochemical sources (2-ethylhexanol and salicylic acid).

MANUFACTURE:-Produced through an esterification reaction between salicylic acid and 2-ethylhexanol, followed by purification.

ANIMAL TESTING:-Cruelty-free status depends on the manufacturer. Many comply with global bans on animal testing (e.g., EU regulations).

GMO:-Not derived from genetically modified organisms (Non-GMO).

VEGAN:- Vegan; no animal-derived ingredients or animal testing involved.

PROPOSITION:-Proposition 65 (California): Not listed as a chemical requiring specific warnings.

WARNING:-Skin Sensitivity: Generally considered safe; however, individuals with sensitive skin may experience mild irritation.
Photostability: Moderately stable; typically combined with photostable UV filters in sunscreen formulations.
Environmental Concerns: May pose a minor risk to aquatic ecosystems; use is regulated in some regions.
Usage Levels: Commonly used up to 5% in sunscreen formulations.
External Use Only: Avoid ingestion and contact with eyes.

CAS Number : 69-72-7

INCI: Salicylic Acid

Composition: Salicylic acid is a monohydroxybenzoic acid, with the chemical formula C7H6O3. It consists of a phenolic ring with a carboxylic acid group (-COOH) and a hydroxyl group (-OH) attached to it.

Purity Grade: No purity grade applicable

Appearance: Salicylic acid typically appears as a white, crystalline powder.

Solubility: Salicylic acid is sparingly soluble in water but soluble in alcohol, ether, and other organic solvents. Its solubility increases with temperature.

Preservation : Salicylic acid should be stored in a cool, dry place away from direct sunlight and moisture to prevent degradation. It should be kept tightly sealed in its original container.

Storage: Store in a closed container at a dry place at room temperature        

Raw Material Source : Salicylic acid can be sourced from natural materials such as the bark of the willow tree (Salix species) or synthesized from phenol through chemical processes.

Manufacture: Salicylic acid is primarily manufactured through the chemical synthesis of phenol, which undergoes a series of reactions including carboxylation, hydrolysis, and decarboxylation to yield salicylic acid.

Animal Testing: Not animal tested  

GMO: GMO-free (does not contain plant-derived components)

Vegan: Does not contain animal-derived components

Proposition: SALICYLIC ACID complies with relevant regulations and guidelines

Warning : Avoid contact with eyes. In case of contact, rinse thoroughly with water. Use appropriate protective equipment when handling. Keep out of reach of children.

CAS Number: 73398-61-5

INCI: Caprylic/Capric Triglyceride

Composition: CCTG is composed of esters derived from caprylic and capric fatty acids and glycerin.

Purity Grade: No purity grade applicable

Appearance: Clear, colorless liquid.

Solubility: Insoluble in water; soluble in oils and other lipophilic solvents.

Preservation: CCTG formulations may include antioxidants to maintain product stability.

Storage: Store in a closed container at a dry place at room temperature

Raw Material Source: Derived from natural sources such as coconut or palm oil.

Manufacture: CCTG is produced through esterification processes using high-quality fatty acids and glycerin.

Animal Testing: Not animal tested

GMO: GMO-free (does not contain plant-derived components)

Vegan: Does not contain animal-derived components

HS Code: 29159090

Proposition: CCTG complies with relevant regulations and guidelines

Warning: Avoid contact with eyes and skin. Use appropriate protective equipment when handling.

CAS Number: 79-14-1

INCI: Glycolic Acid

Composition: FINECHEMO GLYCOLIC ACID is composed of glycolic acid, the smallest alpha-hydroxy acid (AHA), known for its exfoliating, skin-renewing, and brightening properties in cosmetic and dermatological formulations.

Purity Grade: Cosmetic/Pharmaceutical Grade (Typically ≥ 70% aqueous solution or as required)

Appearance: Colorless to light yellow liquid (in solution) or white crystalline solid (pure form)

Solubility: Highly soluble in water and alcohol

Preservation: Preservative-free

Storage: Store in a tightly closed container in a cool, dry, and well-ventilated area. Protect from direct sunlight and sources of ignition. Store away from incompatible materials (e.g., strong bases or oxidizing agents).

Raw Material Source: Synthesized from natural feedstocks such as sugarcane or through chemical synthesis using formaldehyde and synthesis gas

Manufacture: Produced via controlled chemical synthesis or fermentation, followed by purification to cosmetic or pharmaceutical-grade standards

Animal Testing: Not animal tested

GMO: GMO-free

Vegan: Does not contain animal-derived components

Proposition: FINECHEMO GLYCOLIC ACID complies with international cosmetic regulations, including allowable concentration limits for AHA use (EU, US FDA, ASEAN)

Warning: For external use only. Avoid contact with eyes and mucous membranes. May increase skin sensitivity to the sun—use sunscreen and limit sun exposure during use. Handle with care in high concentrations.

CAS Number: 9004-62-0

INCI Name: Hydroxyethylcellulose

Composition: Chemically modified cellulose polymer
Made by reacting alkali-cellulose with ethylene oxide, introducing hydroxyethyl groups to the cellulose backbone
Consists primarily of glucose units with hydroxyethyl substitution

Purity Grade: Cosmetic Grade / USP Grade / Industrial Grade

Purity: Typically ≥99% polymer content (ash, salt, and solvent residues within safe limits)

Appearance: White to off-white, free-flowing powder or granules
Odorless or very slight cellulose-like odor

Solubility: Soluble in cold or warm water
Insoluble in oils and most organic solvents
Forms clear to slightly hazy, smooth gels

Preservation: Not self-preserving. Does not support microbial growth when dry
In formulations, requires preservative system to prevent microbial contamination in aqueous solutions

Storage Conditions: Store in a cool, dry place Protect from moisture and humidity
Keep container tightly closed
Recommended temperature: <25°C (77°F)

Shelf life: Minimum 24 months if properly stored

Raw Material Sources: Derived from natural cellulose found in wood pulp or cotton linters

Manufacture: Produced by alkaline etherification of cellulose with ethylene oxide
Followed by purification and drying steps to yield a stable powder form
No animal-derived materials used in production

Animal Testing: Not tested on animals (when sourced from certified cruelty-free suppliers)

GMO Status: Non-GMO Cellulose sources are naturally non-genetically modified

Vegan Status: 100% Vegan Derived entirely from plant-based raw materials
No animal ingredients or by-products involved

California Proposition 65 Compliance:
Compliant Not listed under California Prop 65 as a known carcinogen or reproductive toxin

Warning / Caution: Inhalation of fine dust during handling may cause mild respiratory irritation—use dust masks and ventilation in bulk handling
In wet form, may cause slippery surfaces
Avoid exposure to humidity before mixing, as it may cause premature gelling or clumping

CAS NO. :-81-13-0.

INCI:- Panthenol.

COMPOSITION:-DL-Panthenol (Pro-Vitamin B5): A racemic mixture of D-Panthenol and L-Panthenol.
Active Ingredient: Typically >99%.

PURITY GRADE:-Pharmaceutical Grade or Cosmetic Grade, depending on application.

APPEARANCE:-White crystalline powder or a colorless to slightly yellow viscous liquid (depending on form).

SOLUBILITY:-Water: Soluble.
Alcohol: Soluble.
Oils: Practically insoluble.

PRESEVATION:-Does not require preservatives as it is inherently stable under recommended conditions.

STORAGE:-Store in a cool, dry place away from light and heat.
Recommended temperature: Below 25°C (77°F).

RAW MATERIAL SOURCE:-Typically synthesized from petrochemical derivatives or other carbon sources.

MANUFACTURE:- .DL-Panthenol is synthetically manufactured through chemical processes.

ANIMAL TESTING:-Often marketed as not tested on animals, but check with specific suppliers.

GMO:-Non-GMO.

VEGAN:-Vegan-friendly; does not contain any animal-derived components.

PROPOSITION:-Commonly used as a moisturizing and conditioning agent in skin care, hair care, and personal care products.

WARNING:-Generally considered safe when used within recommended concentrations.
Avoid ingestion or contact with eyes.
May cause mild skin irritation in rare cases with sensitive skin.